Product Detail
Polishing Wair Nail
Product Detail
Model No. : 313
Price : 1,26,500/-
1) Load the polishing barrel with wire nails 3 to 4 inches above the half size of the barrel and remaining portion with saw Dust. If the nail are found rusty, it is advisable to Mix a little quantity of paraffin oil(Half liter Kerosene) Prior to loding of Saw Dust. Rotated the barrel with blind lid on, for about 10 minutes. After this process, load the barrel with Saw Dust and rotate the barrel for about 30 minutes fixing blind lid-take out blind lid and fix up perforated lid to take out Saw Dust from the barrel by rotating. Continue this process again for about 40 minutes loding the barrel with fresh saw dust. This will result into bright shining look of Wire Niles. The Saw Dust Used in second sequence can be re-used for the first cycle of the same process in next batch. This ensures economy of Saw Dust and solving the storage space.
2) If the mirror finnish is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequence of polishing insted of Saw Dust, 15 to 20 kgs. of such LEATHER PIECES can be applied again and again for about 15 to 20 cycles till they become very oily.